Yangzhou Kangcheng Power Equipment Co., Ltd.
Wholesale genset diesel generator Manufacturer2026-07-31
Content
Deutz generator sets are diesel power units built on Germany's Deutz engine platform, currently available from 24KW to 180KW, and they are chosen mainly for three reasons: a compact, well-matched mechanical structure that keeps downtime low, strong torque reserve for fast load response, and low fuel consumption that keeps running costs under control. As a diesel generator set built around a globally recognized European engine brand, this generator set sits between compact portable generator units and heavy industrial generator lines, making it a common choice for construction sites, factories, and backup power systems.
Compared with a generic diesel electrical generator, a Deutz diesel generator is built around three measurable strengths that procurement teams look for before signing off on a supplier.
The engine structure keeps key components under lower mechanical stress, so the unit tolerates continuous operation and rough site conditions rather than only short backup cycles. The 128KW model, for example, is built on a single-pump structure that has been used in the European market for over 12 years, produced to European standards and certified in Germany.
A large torque reserve and quick transient response mean the set can absorb sudden load spikes, such as motors starting, without stalling or dipping voltage. This matters most on construction sites where cranes, mixers, and welding equipment switch on and off throughout the day.
Lower fuel consumption per kWh and a simpler mechanical layout reduce both running cost and the time technicians spend on service. Spare parts are also easier to source and interchange, which shortens repair windows on long-term projects.
Yangzhou Kangcheng Power Equipment Co., Ltd, a Deutz genset factory operating since 2003, currently lists four power grades on its Deutz generator sets line, each aimed at a different job size.
| Model | Rated Power | Structural Highlight | Best Fit For |
| 24KW Deutz generator set | 24KW | Compact small-power platform, well-matched components | Small shops, remote sites, light construction backup |
| 128KW Deutz generator set | 128KW | Single-pump structure, 12+ years validated in Europe | Medium construction sites, factory backup lines |
| 160KW Deutz generator set | 160KW | Large torque reserve, high mechanical durability | Larger industrial facilities, data center backup |
| 180KW Deutz generator set | 180KW | Long-term validated platform, reliable structure | Heavy construction, large commercial buildings |
Every Deutz diesel generator leaving the factory is built with a fixed baseline of components so it can be commissioned without extra sourcing on site.
On top of the base build, buyers can add an ATS automatic transfer switch, a single-axle trailer for mobile sites, a 12 or 24-hour fuel tank, a waterproof enclosure, or a fully enclosed silent generator set housing depending on the site conditions.
Four power grades built on the same German Deutz engine platform, from light backup duty to heavy industrial main power.
The 128KW and 180KW models handle tower cranes, concrete mixers, and welding equipment on larger sites, while the 160KW model, built on the same long-tested single-pump platform, fits medium-scale projects that still need dependable load response in rough conditions.
Water-cooled systems keep the thermostat range around 95 to 105 degrees Celsius, with maximum water temperature capped near 104 degrees, which allows stable running inside hot workshops or enclosed plant rooms. The 24KW unit typically covers backup duty for small workshops, while the 128KW to 180KW range can serve as primary power for mid-sized manufacturing lines.
For hotels, malls, and office buildings, a silent diesel generator configuration with a fully enclosed, sound-attenuated housing brings noise down to roughly 63 to 75 decibels measured at 7 meters, letting the 24KW and 128KW models sit close to occupied space without disrupting daily operations.
Hospitals, data centers, and communication stations rely on the 160KW and 180KW models for their start time of around 5 to 6 seconds. Paired with an ATS automatic transfer switch, the unit picks up the load automatically after a mains failure, closing the gap before it affects critical equipment.
Three checks make the biggest difference in getting the sizing right the first time.
| Check | Recommendation |
| Power matching | Add up simultaneous equipment load and keep a 20 to 30 percent margin, for example a 100KW site load points toward the 128KW model as prime power |
| Operating environment | Waterproof housing for outdoor exposure, silent enclosure near hospitals or schools, and power derating at altitudes above 1000 meters |
| Maintenance cycle | Oil and filter change every 250 running hours or 6 months, belt and battery check every 500 hours, full overhaul once a year |
What emission standard do these units meet
All current Deutz generator sets from Yangzhou Kangcheng Power Equipment comply with China Stage II emission limits across the 24KW to 180KW range.
What separates the 128KW and 160KW models
Both use a single-pump structure proven over 12 years in the European market, but the 160KW unit carries a larger torque reserve and greater mechanical durability, positioning it for heavier industrial and infrastructure backup roles.
Is a silent version available
Yes, a fully enclosed silent generator set option is available with internal exhaust silencing and a corrosion-resistant housing, bringing noise down to roughly 63 to 75 decibels at 7 meters.
How long can the 180KW unit run on its standard tank
The standard tank supports about 8 to 10 hours of continuous operation, with optional 12 or 24-hour tanks available for unattended or remote-site use.
What protection rating does the alternator carry
Standard units carry insulation class H with protection rating IP22 to IP23, blocking solid objects larger than 12 millimeters and water intrusion within a 60 degree angle from vertical.
A Deutz generator set earns its place on a job site by combining a proven German engine platform with a structure that is easier to maintain than many heavier industrial generator lines. As a Deutz genset factory built around OEM generator set manufacturing since 2003, Yangzhou Kangcheng Power Equipment covers the 24KW to 180KW range with China Stage II compliant, ISO9001 and ISO14000 certified units, giving buyers a German Deutz generator option that fits everything from a small commercial backup circuit to a heavy construction main power line.
Engineering Support Beyond the Generator
Whether you need standard generator sets or have complex engineering projects, our team can provide you with professional support.
Recommended
Experienced staff and experts are always available to provide you with professional guidance and solutions to technical problems.
